Buy Bosch DC010 Digital Carriage Display for 4100-series Table SawsBosch DC010 Digital Carriage Display for 4100-series Table Saws Product Description:
- Ultimate Precision - Digital readout complements best-Inch class rip fence - Digital Accessory Kit available as upgrade for 4100 & 4100-09
- Accurate to 1/32-Inch - Readout displays-Inch-increments of 1/8-Inch, 1/16-Inch, 1/32-Inch and metric up to .5mm
- Enhanced Productivity - High visibility LCD for ease of readability
- Faster set up for repetitive cutting - Reduces material waste by taking out the guesswork
- Jobsite Tough - Robust cast aluminum design withstands jobsite abuse and weather
Product Description
Includes Digital Carriage Display for 4100-Series Table Saws - DC010
Customer Reviews
Most helpful customer reviews
45 of 45 people found the following review helpful.
Easy add-on, works great
By J. Taylor
I bought the 4100 saw without the digital readout and wanted to add this feature, so when it became available, I purchased it. It is a very well constructed piece of equipment as most Bosch stuff is. The assembly was simple and the instructions were clear and it was easy to attach to the saw. The readout is large enough to see easily and bright enough for work outside. Easy to zero and then set your rip dimension. It works really well and allows a reading for a wide rip with the sliding table feature on the 4100 and gives very accurate readings (I trust it more than my ruler now!)The only irritation I have is the auto shutoff seems to be too fast if you are making multiple settings. You just have to hit the on/off button and it goes back to the set reading, but a little aggravating. I need to measure the time and see what it is.All-in-all a very good investment and first quality!
18 of 18 people found the following review helpful.A MUST have for your 4100-09 Table Saw!
By Frank E. Trinkle
This is the EXACT same unit that comes with the 4100DG-09 table saw for $100 more. It works flawlessly and the installation takes about 10-minutes.The directions for installation are pretty clear, but could be improved. Nonetheless, it was a painless install and I saved $100 by ordering the base 4100-09 and the DG separately.The unit is deadly accurate and can be set to increments as low as 1/32.As far as I'm concerned, this is a MUST purchase for Bosch 4000 and 4100 owners!
14 of 17 people found the following review helpful.
Bosh should have put some more thought into this
By A. J. Kennedy
I have the table extension, and my rear table extension bashes into this when it is docked on the left side of the table. Also, when the sleep mode is activiated, it does not return automatically when this is moved. Which causes you to have to re-zero the unit every time you do this. And if you start to adjust your fence after a cut and forget to wake this up, you got to got back to square one. I thougt I would use this all the time, but since my fence has a magnifer over the tape, it is quicker for me to just relay on that.
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
